> Aggressive restorative extraction tools for residential and commercial jobs.

> Works great on stains and heavily soiled, matted carpet.

> For truck mounts or portable carpet cleaning systems.

How to assemble the machine? Or how to use machine?

Handle Adjustment: Loosen the adjustment knob located below this machine’s label (turn counter-clockwise to loosen, clockwise to tighten).

Adjust the handle to a comfortable height. Several adjustments may be needed before a desirable operating position is found.

NOTE: Most technicians have found better control and less fatigue when the handle is in a low position just around the hip line. There is an ideal position for each person which will ensure this machine will be do the work instead of you.

2. Solution and Vacuum Hose Hookups: Your machine is equipped with male quick connect for the solution hose hookup and a two inch OD vacuum hose inlet (refer to the above illustration). A solution hose with a female quick connect is required. The vacuum inlet requires a two inch ID vacuum hose for proper air flow with a truck mounted system.

IMPORTANT: The vacuum hose must be in good condition to ensure maximum airflow. If you do not have a female quick connect and can not find it locally, it can be ordered from the authorized customer service agent.

3. Electrical Cord Hook Up: The 50 foot electrical cord on your machine is A detachable three-prong grounded line requiring a three-prong, 15 amp receptacle. A three-prong to two-prong adapter may be used, providing its ground wire is properly attached to a grounded terminal. 

Applications: 

The tool that revolutionized the way carpeting is cleaned remains the standard of performance.

The most remarkable tool to deep clean heavily soiled carpets faster, restore the nap, groom the carpet pile and reduce drying times.